DiagramDesigner/diagramCavas/source/selectPanel.cpp

#include <QJsonArray>
#include "selectPanel.h"
#include <QMessageBox>
#include <QCloseEvent>
#include "graphicsDataModel/fixedPortsModel.h"
#include "graphicsItem/graphicsBaseItem.h"
#include "util/selectorManager.h"
#include "powerEntity.h"
#include "topologyManager.h"
#include "baseProperty.h"
#include "graphicsItem/electricBayItem.h"
#include "statusBar.h"
#include "graphicsItem/functionModelItem/graphicsFunctionModelItem.h"

SelectPanel::SelectPanel(PowerEntity* pEntity,QWidget *parent,DiagramMode mode)
    : BaseDrawingPanel(pEntity,parent,mode)
{
    m_pStatusBar->setButtonVisible(false);
    _pModel->setPanelMode(1);       //设置为预览模式
}

SelectPanel::~SelectPanel()
{

}

QJsonObject SelectPanel::getDiagramInfo()
{
    QJsonObject obj;
    QJsonArray arr;
    if(_pModel)
    {
        QMap<QUuid,ItemPageInfo> map = _pModel->allNodePos();
        for(auto iter = map.begin();iter != map.end();++iter)
        {
            QJsonObject node;
            node["id"] = iter.key().toString();
            node["x"] = iter.value().pos.x();
            node["y"] = iter.value().pos.y();
            node["width"] = iter.value().dWidth;
            node["height"] = iter.value().dHeight;
            node["rotate"] = iter.value().dRotate;
            arr.append(node);
        }
        obj["nodes"] = arr;

        QJsonArray arrConnect;
        QVector<ModelProperty*> vec = _pModel->allConnectionProperty();
        for(auto& pPro:vec){
            Connection con = pPro->getConnection();
            QJsonObject connect;
            connect["id"] = pPro->uuid().toString();
            connect["SrcNodeId"] = con.nSrcNodeId.toString();
            connect["SrcPortId"] = con.nSrcPortId.toString();
            connect["DestNodeId"] = con.nDestNodeId.toString();
            connect["DestPortId"] = con.nDestPortId.toString();
            arrConnect.append(connect);
        }
        obj["connections"] = arrConnect;

        QJsonArray arrBay;
        QMap<QUuid,ElectricBayItem*> mapBay =  _pModel->allBayItem();
        for(auto& bayItem:mapBay){
            AbstractProperty* pPro = bayItem->getProperty();
            BayProperty* pBay = dynamic_cast<BayProperty*>(pPro);
            if(pBay)
            {
                QJsonObject bay;
                bay["id"] = pBay->uuid().toString();
                arrBay.append(bay);
            }
        }
        obj["bays"] = arrBay;
    }
    return obj;
}

void SelectPanel::loadNodes(QJsonObject obj)
{
    QJsonArray nodesJsonArray = obj["nodes"].toArray();

    QList<QPair<QString,QUuid>> lst;
    for (QJsonValueRef nodeJson : nodesJsonArray)
    {
        QJsonObject node = nodeJson.toObject();
        QString uuid = node["id"].toString();
        double dX = node["x"].toDouble();
        double dY = node["y"].toDouble();
        double dWidth = node["width"].toDouble();
        double dHeight = node["height"].toDouble();
        double dRotate = node["rotate"].toDouble();

        if(_pModel)
        {
            auto pItem = _pModel->addNodeItem(QUuid(uuid),QPointF(dX,dY),dWidth,dHeight,dRotate);
            if(pItem){
                lst.append(qMakePair(pItem->getName(),QUuid(uuid)));
            }
        }
    }

    QJsonArray connectArr = obj["connections"].toArray();
    for(QJsonValueRef connectJson:connectArr)
    {
        QJsonObject connect = connectJson.toObject();
        QUuid id = QUuid(connect["id"].toString());         //电缆线id，关联component中的电缆
        QUuid srcId = QUuid(connect["SrcNodeId"].toString());
        QUuid srcPortId = QUuid(connect["SrcPortId"].toString());
        QUuid destId = QUuid(connect["DestNodeId"].toString());
        QUuid destPortId = QUuid(connect["DestPortId"].toString());

        PowerConnection* pCon = TopologyManager::instance().connection(srcPortId.toString(),destPortId.toString());
        if(pCon)
        {
            pCon->setId(id.toString());
            QString srcItemId = pCon->fromComponent();
            QString destItemId = pCon->toComponent();
            //todo:从拓扑结构中查找port的id
            if(_pModel)
            {
                QString sName = _pModel->addConnectLline(id,QUuid(srcItemId),QUuid(destItemId),srcPortId,destPortId);
                if(sName != "err"){
                    lst.append(qMakePair(sName,QUuid(id)));
                }
            }
        }
        else
        {
            //todo:提示拓扑结构已改变
        }
    }

    QJsonArray bayArr = obj["bays"].toArray();
    for(QJsonValueRef bayJson:bayArr)
    {
        QJsonObject bay = bayJson.toObject();
        QUuid id = QUuid(bay["id"].toString());
        if(_pModel)
        {
            _pModel->addBayItem(id);
        }
    }

    if(_pModel){
        QString sG;
        QString sZ;
        QString sS;
        for(auto& pBaseItem:_pModel->allItems())        //取grid_zone_station(间隔不含这些内容)
        {
            BaseProperty* pBase = dynamic_cast<BaseProperty*>(pBaseItem->getProperty());
            if(sG.isEmpty())
                sG = pBase->grid();
            if(sZ.isEmpty())
                sZ = pBase->zone();
            if(sS.isEmpty())
                sS = pBase->station();
            break;
        }

        QList<HierarchyItem> lstFirst;

        for(auto& pOtherItem:_pModel->getProjectBayItems())
        {
            BayProperty* pBay = dynamic_cast<BayProperty*>(pOtherItem->getProperty());
            if(pBay){
                // 创建间隔项
                HierarchyItem bayInfo;
                bayInfo.item.nEquipType = 0;  // 间隔的设备类型为0
                bayInfo.item.nCategory = 1;   // 类别为1表示间隔
                bayInfo.item.sName = pBay->tag();
                bayInfo.item.uid = pBay->uuid();
                bayInfo.item.sVoltageLevel = QString::number(pBay->getVoltage());
                bayInfo.item.grid = sG;
                bayInfo.item.zone = sZ;
                bayInfo.item.station = sS;

                lstFirst.append(bayInfo);
            }
        }

        emit _pModel->updateCurrentItems(lstFirst, true);
        emit _pModel->updateTopologyItems(lstFirst, true,true);

        // 第二阶段：处理所有设备
        QList<HierarchyItem> lstSecond;

        // 建立间隔UUID到间隔标签的映射，提高查找效率
        QHash<QString, QString> bayUuidToTag;
        for(auto& pOtherItem:_pModel->getProjectBayItems())
        {
            BayProperty* pBay = dynamic_cast<BayProperty*>(pOtherItem->getProperty());
            if(pBay){
                bayUuidToTag[pBay->uuid().toString()] = pBay->tag();
            }
        }

        for(auto& pBaseItem:_pModel->allItems())
        {
            BaseProperty* pBase = dynamic_cast<BaseProperty*>(pBaseItem->getProperty());

            HierarchyItem info;
            info.item.nEquipType = pBase->type();
            info.item.nCategory = 0;  // 类别为0表示设备
            info.item.sName = pBase->name();
            info.item.uid = pBase->uuid();

            // 查找设备所属的间隔
            QString bayTag;
            QString bayUuid;
            QString sVoltage;

            // 通过间隔标签直接查找
            bayTag = pBase->getBay();

            // 如果需要间隔UUID，可以反向查找
            if(!bayTag.isEmpty()){
                for(auto& pOtherItem:_pModel->getProjectBayItems()){
                    BayProperty* pBay = dynamic_cast<BayProperty*>(pOtherItem->getProperty());
                    if(pBay && pBay->tag() == bayTag){
                        bayUuid = pBay->uuid().toString();
                        sVoltage = QString::number(pBay->getVoltage());
                        break;
                    }
                }
            }

            if(!bayTag.isEmpty()){
                // 设置父间隔信息
                info.parent.nEquipType = 0;
                info.parent.nCategory = 1;
                info.parent.sName = bayTag;
                info.parent.uid = QUuid(bayUuid);
                info.parent.sVoltageLevel = sVoltage;
                info.parent.grid = sG;
                info.parent.zone = sZ;
                info.parent.station = sS;
            }

            lstSecond.append(info);
        }

        emit _pModel->updateCurrentItems(lstSecond, false);
        emit _pModel->updateTopologyItems(lstSecond, false,true);
    }
}

void SelectPanel::clearItems()
{
    if(_pModel){
        _pModel->getScene()->clear();
        _pModel->allItems().clear();
        _pModel->getProjectBayItems().clear();
    }
}