DiagramDesigner/common/core_model/diagram.h

#ifndef DIAGRAM_H
#define DIAGRAM_H
/*********组态图********/
#include <QString>
#include <QUuid>
#include <QJsonObject>
#include <QHash>
#include <QList>
#include <QPointF>
#include <QRectF>

// 组态图信息
struct DiagramInfo {
    QVariant id;        //临时id使用uuid，load数据使用数据库自增id
    QString sName;
    QString sTag;
    QVariant parentId;
    QString sBasePageName;  //父组态图名称
};

struct DiagramEditorWizardBusInfo            //组态编辑母线信息
{
    int nIndex = 0;
    double dVoltage = 0;        //电压等级
    int nLineType = 1;          //1单母线，2双母线
    int nNum1 = 0;      //1母
    int nNum2 = 0;      //2母
    int connectType = 0;        //接线方式，1为分段连接
    int nState = 0;      //母线状态位 0已保存1新建2修改

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorWizardBusInfo &data) {
        out << data.nIndex << data.dVoltage << data.nLineType << data.nNum1 << data.nNum2 << data.connectType << data.nState;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorWizardBusInfo &data) {
        in >> data.nIndex >> data.dVoltage >> data.nLineType >> data.nNum1 >> data.nNum2 >> data.connectType >> data.nState;
        return in;
    }
};

enum class TransformerType      //变压器类型
{
    twoWinding = 0,     //两绕组
    threeWinding        //三绕组
};

enum class BayType      //间隔类型
{
    busSectionBay = 0,      //分段
    busCouplerBay,          //母联
    ptBay,                  //pt
    incomingBay,        //进线
    outcomingBay,       //出线
    compensationBay,    //无功补偿
    bypassBay,          //旁路
    mainTransformerBay  //主变
};

enum class EditorItemType       //组态编辑中的图形项类型
{
    bus = 1,        //母线
    bay,            //间隔
    trans,           //变压器
    line,           //连接线
    None            //空白占位图
};

struct EditorTransConnection        //组态变压器连接信息
{
    QString sName;
    int     nPara = 0;      //012,高中低侧
};

struct DiagramEditorWizardTransformerInfo           //组态变压器信息
{
    QString sName;
    TransformerType     nType;
    double      dVoltageLevel;
    QList<EditorTransConnection>  lstBindObj;             //连接的对象
};

struct DiagramEditorWizardBayInfo           //组态间隔信息
{
    QString sName;
    BayType     nType;
    double      dVoltageLevel;
    QList<QString>  lstBindObj;             //连接的对象
};

struct DiagramEditorComponentInfo            //组态设备信息
{
    int nCategory = 0;      //分类    0电气设备1连接关系
    QString sName;
    int nType = 0;          //类型    1母线2异步电动机3断路器4电缆5电流互感器6电压互感器7隔离开关8接地开关9快速接地开关10双掷接地隔离开关11带电指示器12避雷器13电缆出线套筒14电缆端
    QString sBindObj;   //所关联的实体名 (母线block,间隔block，变压器高中低端子)
    int nBindType = 0;      //关联实体的类型 1母线2间隔3变压器
    int nBindPara = 0;      //关联额外参数,关联变压器时为(0高1中2低)
    QString sBindParent;    //关联父item名，关联变压器时为变压器名
    QStringList sUsedRoute;     //使用设备的线路名
    int nUsedDirection = 0;     //被占用的方向 8421 上下左右
    QPoint  deltaPos = QPoint(0,0);     //相对坐标(相对间隔)
    QUuid uid;
    int nFlag = 0;      //标志0未使用1新建2修改
    int nRotate = 0;    //旋转角

    bool operator ==(const DiagramEditorComponentInfo& obj) const {
        if(nCategory == obj.nCategory && sName == obj.sName && nType == obj.nType && sBindObj == obj.sBindObj && nBindType == obj.nBindType &&
            sUsedRoute == obj.sUsedRoute && nUsedDirection == obj.nUsedDirection && deltaPos == obj.deltaPos && uid == obj.uid && nFlag == obj.nFlag && nRotate == obj.nRotate)
            return true;
        else
            return false;
    }

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorComponentInfo &data) {
        out << data.nCategory << data.sName << data.nType << data.sBindObj << data.nBindType << data.nBindPara << data.sBindParent << data.sUsedRoute << data.nUsedDirection << data.deltaPos << data.uid << data.nFlag << data.nRotate;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorComponentInfo &data) {
        in >> data.nCategory >> data.sName >> data.nType >> data.sBindObj >> data.nBindType >> data.nBindPara >> data.sBindParent >> data.sUsedRoute >> data.nUsedDirection >> data.deltaPos >> data.uid >> data.nFlag >> data.nRotate;
        return in;
    }
};

inline uint qHash(const DiagramEditorComponentInfo &key, uint seed = 0) {
    return qHash(key.uid, seed);
}

struct DiagramEditorRouteInfo            //间隔中单条线路信息
{
    QString sRouteName;
    bool bMainRoute = false;                //主线路(包含设备最多的线路，决定整体布局)
    QList<DiagramEditorComponentInfo>  lstCompo;
    QList<DiagramEditorComponentInfo>  lstOrder;        //线路顺序容器(计算用)
    QList<DiagramEditorComponentInfo>  lstReverse;      //逆序容器(计算用)

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorRouteInfo &data) {
        out << data.sRouteName << data.bMainRoute << data.lstCompo << data.lstOrder << data.lstReverse;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorRouteInfo &data) {
        in >> data.sRouteName >> data.bMainRoute >> data.lstCompo >> data.lstOrder >> data.lstReverse;
        return in;
    }
};

struct DiagramEditorBayInfo             //组态编辑间隔信息
{
    QString name;           //间隔名
    int     nLayout;                //布局    0纵向1横向
    QList<QUuid>            lstFrom;        //起始
    QList<QUuid>            lstTo;          //结束
    QMap<QString,DiagramEditorRouteInfo>    mapRoute;       //线路信息
    QMap<QString,DiagramEditorComponentInfo>    mapComponent;       //设备信息

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorBayInfo &data) {
        out << data.name << data.nLayout << data.lstFrom << data.lstTo << data.mapRoute << data.mapComponent;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorBayInfo &data) {
        in >> data.name >> data.nLayout >> data.lstFrom >> data.lstTo >> data.mapRoute >> data.mapComponent;
        return in;
    }
};

struct DiagramEditorTransNeutralInfo    //组态编辑变压器中性点信息
{
    QString name;           //中性点名
    int     nType = 0;          //中性点类型     0高1中2低
    QPointF delPoint;          //相对变压器偏移量
    QMap<QString,DiagramEditorRouteInfo>    mapRoute;   //中性点对应的线路结构

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorTransNeutralInfo &data) {
        out << data.name << data.nType << data.delPoint << data.mapRoute;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorTransNeutralInfo &data) {
        in >> data.name >> data.nType >> data.delPoint >> data.mapRoute;
        return in;
    }
};

struct DiagramEditorTransInfo           //组态编辑变压器信息
{
    QString name;           //变压器名
    QMap<int,DiagramEditorTransNeutralInfo>     mapNeutral;         //中性点结构
    QMap<QString,DiagramEditorComponentInfo>    mapComponent;       //设备信息

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorTransInfo &data) {
        out << data.name << data.mapNeutral << data.mapComponent;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorTransInfo &data) {
        in >> data.name >> data.mapNeutral >> data.mapComponent;
        return in;
    }
};

enum class DiagramEditorStructType
{
    block = 0,          //模块(母线段、间隔、变压器)
    blockContainer, //模块容器(包含若干模块)
    rowData         //行数据(包含若干容器)
};

struct DiagramEditorConnectType               //组态编辑连接信息
{
    QString sName;
    int     nType = 0;      //1母线，2间隔,3变压器

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorConnectType &data) {
        out << data.sName << data.nType;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorConnectType &data) {
        in >> data.sName >> data.nType;
        return in;
    }
};

struct DiagramEditorBriefConnect              //组态编辑时连接信息
{
    QUuid                        uid;
    DiagramEditorConnectType     con1;
    DiagramEditorConnectType     con2;
    int                          nPara = 0;         //万用参数(变压器中表示连接位置,0高压侧，1中压侧，2低压侧)

    bool operator==(const DiagramEditorBriefConnect& obj)
    {
        if(this == &obj)
            return false;
        if((con1.sName == obj.con1.sName && con2.sName == obj.con2.sName)||(con1.sName == obj.con2.sName && con2.sName == obj.con1.sName))
            return true;
        else
            return false;
    }

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorBriefConnect &data) {
        out << data.uid << data.con1 << data.con2 << data.nPara;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorBriefConnect &data) {
        in >> data.uid >> data.con1 >> data.con2 >> data.nPara;
        return in;
    }

    DiagramEditorConnectType getOpposite(const QString& s){          //获取另一端名称
        if(con1.sName == s)
            return con2;
        else if(con2.sName == s)
            return con1;
        return DiagramEditorConnectType();
    }
};

struct DiagramEditorBlockInfo               //组态编辑block信息
{
    QString     sName;
    QString     sContainerId;   //所属的容器id
    int         nType;      //1母线,2间隔,3变压器
    int         nContainerLevel;        //所处容器的层级   0,1,2,3
    QUuid       uid;
    QList<QUuid> _lstCon;        //连接信息
    QList<QPair<int,QUuid>> _lstSub;    //子对象列表(非拓扑计算使用)    如母线子对象为间隔，间隔子对象为item，电动机子对象为item    <类型，uid>    类型：0设备1间隔
    QRectF      recSize;        //当前大小(根据内容确定)
    QPointF     sceneDelta;     //block中心相对位移(计算布局位置
    bool        bEditState;     //详细编辑状态

    //bus
    float       fVoltage;           //母线电压
    int         nBusType;           //0无前缀,1:Ⅰ母,2Ⅱ母
    int         nIndex;             //第几段,1A,2B,3C,4D,5E,6F,7G,8H
    //bay
    BayType         nBayType;
    DiagramEditorBayInfo                    bayInfo;            //间隔信息
    //transformer
    TransformerType         nTransType;
    DiagramEditorTransInfo                     transInfo;

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorBlockInfo &data) {
        out << data.sName << data.sContainerId << data.nType << data.nContainerLevel << data.uid << data._lstCon << data.recSize << data.sceneDelta
            << data.bEditState << data.fVoltage << data.nBusType << data.nIndex << data.nBayType << data.bayInfo << data.nTransType << data.transInfo;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorBlockInfo &data) {
        in >> data.sName >> data.sContainerId >> data.nType >> data.nContainerLevel >> data.uid >> data._lstCon >> data.recSize >> data.sceneDelta
            >> data.bEditState >> data.fVoltage >> data.nBusType >> data.nIndex >> data.nBayType >> data.bayInfo >> data.nTransType >> data.transInfo;
        return in;
    }
};

struct DiagramEditorContainerInfo           //组态编辑容器信息
{
    QString     sId;
    double      dMidUpY;             //1母上边界
    double      dMidDownY;           //2母下边界
    double      dStartX;            //起始x
    double      dStartY;            //起始y
    double      dWidth;             //宽度
    double      dHeight;
    double      dMaxUpH;         //上方最大高度(1母线到上边界)
    double      dMaxDownH;         //下方最大高度(2母线到下边界)
    QMap<int,QList<DiagramEditorBlockInfo>>    mapBlockInfo;

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorContainerInfo &data) {
        out << data.sId << data.dMidUpY << data.dMidDownY << data.dStartX << data.dStartY << data.dWidth << data.dHeight << data.dMaxUpH << data.dMaxDownH << data.mapBlockInfo;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorContainerInfo &data) {
        in >> data.sId >> data.dMidUpY >> data.dMidDownY >> data.dStartX >> data.dStartY >> data.dWidth >> data.dHeight >> data.dMaxUpH >> data.dMaxDownH >> data.mapBlockInfo;
        return in;
    }
};

struct DiagramEditorProjectInfo             //editor工程信息
{
    QString     sName;
    QUuid       uid;
    QMap<int,DiagramEditorWizardBusInfo>  mapBus;
    QMap<int,QList<DiagramEditorContainerInfo>>   mapSturctContainer;
    QMap<QUuid,DiagramEditorBriefConnect>       mapConnect;

    friend QDataStream &operator<<(QDataStream &out, const DiagramEditorProjectInfo &data) {
        out << data.sName << data.uid << data.mapBus << data.mapSturctContainer << data.mapConnect;
        return out;
    }
    friend QDataStream &operator>>(QDataStream &in, DiagramEditorProjectInfo &data) {
        in >> data.sName >> data.uid >> data.mapBus >> data.mapSturctContainer >> data.mapConnect;
        return in;
    }
};

struct DiagramContent {
    QString diagramId;  // 对应的PowerEntity ID

    // 元素位置信息 <元素ID, 位置>
    QHash<QString, QPointF> elementPositions;
    QHash<QString, QList<QPointF>> connectionPaths; // 自定义路径点
};

struct BaseComponentInfo            //基模图元数据
{
    int id = 0;
    QUuid uuid;
    QString name;
    QString tag;
    int typeId = 0;
    QJsonObject context;
    QString metaMmodel;
    QString projectModel;
};

struct EditorProjectInfo            //editor工程数据
{
    int id = 0;
    QUuid   uuid;
    QString name;
    QString tag;
};

struct EditorBaseSettingInfo        //editor基础设置
{
    int id = 0;
    QUuid   uuid;
    QString projectName;            //所属工程名
    QString autor;                  //作者
    QByteArray context;             //内容
    QUuid   generateUid;            //生成的图uuid
    QString ts;                     //时间戳
};


#endif // DIAGRAM_H