342268e50a
support for amqps:// addresses in the AMQP::Address class (although it does not yet make a real secure connection)
2018-03-02 13:53:00 +01:00
ab817384b1
fixed auth method prefix extra / char
2018-03-02 12:54:09 +01:00
b9047f5ea7
added ampqs:// parsing to address
2018-03-02 12:14:43 +01:00
41239a1952
fixed to make returning message functional, and added test code
2018-03-01 22:54:50 +01:00
1ccd93cc5e
final step (although untested) for handling returned messages
2018-03-01 22:27:27 +01:00
1f3500cee8
breaking changes:
...
channel.publish() now returns a DeferredConsumer object on which callbacks can be installed for handling returned messages,
channel.get().onSize() has a different behavior: it now reports the message size (and no longer the queue size),
channel.get().onCount() has been added: it reports the queue size (this used to be the onSize() method),
channel.consume().onSize() method has been added to find out the size of the upcoming message
2018-03-01 21:12:53 +01:00
f39df772d3
breaking changes:
...
channel.publish() now returns a DeferredConsumer object on which callbacks can be installed for handling returned messages,
channel.get().onSize() has a different behavior: it now reports the message size (and no longer the queue size),
channel.get().onCount() has been added: it reports the queue size (this used to be the onSize() method),
channel.consume().onSize() method has been added to find out the size of the upcoming message
2018-03-01 21:12:50 +01:00
ef76876d67
refactored code to make room for a deferredpublisher class (which will also use the deferredreceiver base class)
2018-03-01 18:07:18 +01:00
520fe40201
refactored handling of incoming messages from consume and get operations, to prepare for future handling of returned messages and publisher confirms. this also implies a small change to the api: the begin-callback when a message is received now also gets the original exchange and routing key (which could be useful)
2018-03-01 17:34:27 +01:00
3ccc6af475
added deferredreceiver files (forgotter in prev commit)
2018-02-27 05:09:03 +01:00
e0feb17ecc
renamed deferredconsumerbase into deferredreceiver, because it is not only a base class for the consumer, but also for other receiving operations: get requests and in the future also for returned messages
2018-02-27 05:08:21 +01:00
ec327de396
less conservative caching of outgoing data. This fixes #184
2018-02-07 10:08:32 +01:00
f5540e9af2
fixed autodelete flag for declaring an exchange and added support for internal exchange. this fixes #183
2018-02-06 21:54:56 +01:00
accc1810a0
remove timer interval from ctor init list
2018-02-01 15:31:19 +01:00
5a853134aa
remove second ctor with heartbeat interval (extend class instead). Change private to protected to allow LibBoostAsioHandler to be extended.
2018-02-01 15:27:59 +01:00
33c8e76a7e
correct comment
2018-02-01 13:11:23 +01:00
ae3b94fe92
use custom heartbeat interval outright, if set.
2018-02-01 13:05:41 +01:00
b713d48bb9
add second constructor with heartbeat interval; apply modern cpp typedefs; Add comments;
2018-02-01 12:44:48 +01:00
af1b54e268
Removed double inclusion of boost/function.hpp
2018-01-30 11:45:40 +00:00
1e9d1360f7
Fixed build error.
2018-01-30 10:43:08 +00:00
4b2c423896
Build examples now with travis-ci to ensure new changes don't break existing code. Fixed warnings as a result of lambda captures.
2018-01-30 10:07:27 +00:00
c287382770
fix includes because existing code was no longer compiling after the latest changes
2018-01-30 10:45:16 +01:00
3d823adb51
add include for boost/function.hpp
2018-01-30 09:27:43 +01:00
99974d36d3
fixed strcasecmp error on windows platforms.
2018-01-29 17:29:27 +01:00
0995b3e0ec
fixed htonll compile error on windows.
2018-01-29 17:12:06 +01:00
f64b705c19
Merge branch 'clean-build' of https://github.com/surgura/AMQP-CPP into clean-build
2018-01-28 22:20:18 +01:00
62065431b3
forgot file
2018-01-26 22:42:56 +01:00
99cc34d922
Added linux_tcp.h so we can now once again use the tcp implementation of the handler.
2018-01-26 22:42:28 +01:00
f25efd2235
Merge https://github.com/CopernicaMarketingSoftware/AMQP-CPP into travis
2018-01-25 18:17:43 +01:00
959e6238ae
code formatting; capture strand by copy in timer handler
2018-01-24 15:06:35 +01:00
8477fbb272
add PTR_FROM_THIS define; remove io_handler code duplication via read/write/dispatch wrapper functions.
2018-01-24 13:24:43 +01:00
cf7261add5
Reordered public include files so they are now in include/amqpcpp/.
2018-01-24 01:58:18 +01:00
4c7a71e3a6
Fixed compile error on g++ caused by fixing warning.
2018-01-24 00:59:46 +01:00
b211fc7779
fixed 32 bit warnings.
2018-01-24 00:38:07 +01:00
4072430fb3
Attempt to fix warning C4267
2018-01-24 00:19:55 +01:00
d71040b2e5
fix bad opening comment block
2018-01-23 19:16:44 +01:00
27f765b5f7
linux tcp is now opt-out instead of opt-in(to keep compatibility with the original lib).
2018-01-23 19:15:10 +01:00
4652a9cbdf
libboostasio.h does not compile with clang-3.9 due to following error when compile if cpp17 preprocessor check: embedding a directive within macro arguments has undefined behavior [-Werror,-Wembedded-directive]. Fix this by moving the bind away from preprocessor macro. Replace the STRAND_SOCKET_HANDLER, STRAND_TIMER_HANDLER macros with template functions.
2018-01-23 18:55:46 +01:00
5701d28b2b
added BUILD_TCP option to build the linux sockets implementation.
2018-01-23 18:49:59 +01:00
001dfaa7e0
- Moved linux specific TCP implementation to a seperate folder and removed it from default build. Does not yet build correctly if you want that.
...
- Fixed conversion warnings from <some integer> type to uint32_t, which happens a lot around here. This is no functional change, just making it explicit so the compiler doesn't warn.
2018-01-23 16:47:53 +01:00
fd14790166
fix boost::placeholders undefined error and remain well explicited than use just '_1' or '_2'
2018-01-18 10:08:56 +01:00
97124dc604
Fix compile
...
remove ?boost::placeholders::' .
2018-01-17 15:20:04 +01:00
b25bd583a3
added operator< to AMQP::Address
2017-12-29 19:27:40 +01:00
f05aba0782
added TcpConnection::fileno() to expose the internal filedescriptor / socket
2017-12-12 17:10:51 +01:00
c63f62189e
better docblocks so that future users will understand the difference between the callbacks for a consumer (mentioned in issue #156 )
2017-11-21 16:45:05 +01:00
60466cc6bf
Updated comment for Channel and TcpChannel constructors (to prevent issues like #154 )
2017-11-17 11:38:54 +01:00
d75ae2ebe1
fix compile issue because comma was missing
2017-10-24 12:54:29 +02:00
034e72bbc2
Added example/test application to demonstrate boost asio io_service handler.
2017-10-23 11:40:49 +01:00
5410f1abdd
Replaced tabs with spaces in LibBoostAsioHandler
2017-10-19 16:14:21 +01:00
cdd9918e6a
Cleaned up docs/comments in LibBoostAsioHandler
2017-10-19 16:06:41 +01:00
a9daf7e769
Added strand to LibBoostAsioHandler.h to ensure that 1 thread goes through the 'gate' (from the io_service set of threads) at any one time.
2017-10-19 15:59:40 +01:00
12ffe885c1
Cleaned up existing boost handler. There were a few bits that needed tidying up.
2017-10-19 14:44:29 +01:00
e3e0c6da19
Added timer boost asio event handler to perform health checks.
2017-10-13 09:26:32 +01:00
d1b2139af0
Cleaned up the handler upon conducting some additional testing.
2017-10-12 17:11:38 +01:00
e9cb9fbe92
Renamed libboostasio.hpp to libboostasio.h. Added header to copied files as part of install.
2017-10-12 11:41:41 +01:00
204b68401e
Added boost asio TCP handler for use on POSIX-based systems
2017-10-12 11:22:47 +01:00
27ac6aeea5
added operator<< to write a amqp address to a stream
2017-06-21 09:44:52 +02:00
acd6698db3
the libev timer no longer takes ownership over the event loop
2017-06-21 09:35:48 +02:00
49337d078d
heartbeats will now only be sent if the connection is idle
2017-06-19 10:24:03 +02:00
fda26f20f4
update the readme, heartbeats are now disabled by default, only the libev implementation has enabled them, resolves #137
2017-06-16 11:17:13 +01:00
90d9946474
implemented heartbeats for libev
2017-06-16 10:36:34 +01:00
a091921e88
added connection::heartbeat() method, userspace programs are responsible for calling this method once every 60 seconds
2017-06-16 10:14:42 +01:00
3ab9eed268
Simplify message counter logic
2017-06-08 23:41:55 +02:00
f0712cfdc2
Add ACK and NACK callbacks to Channel
2017-06-08 22:50:45 +02:00
30e652c669
Add Channel::setConfirmMode() and Channel::messageCounter() methods
2017-06-08 22:19:55 +02:00
c7a12d22c1
Add confirm.select and confirm.select-ok frames
2017-06-08 22:00:28 +02:00
b2877434cf
fix new bug in parsing amqp:// address where the default vhost was incorrectly overwritten
2017-05-11 13:59:07 +02:00
8501f19c0b
fixed parsing amqp:// address
2017-05-04 15:51:23 +02:00
5e895f3b9f
Update CMakeLists.txt. fixes #123
2017-05-04 11:34:17 +02:00
d7214d1373
added Addresses class to parse a comma separated list of addresses
2017-05-01 22:06:28 +02:00
2a249ae7ea
fixed issue with parsing the password in a amqp:// string
2017-05-01 21:59:45 +02:00
af6886be92
added comparison operators to Address and Login classes
2017-04-26 09:00:01 +02:00
6f6c98f453
fixed compile issue
2017-03-16 11:36:35 +01:00
0d9b4c8bba
reinstalled channel methods that were removed to stay compatible with previous amqp-cpp release
2017-03-13 14:02:33 +01:00
bdae991324
Moved header files to include/ because of broken header dependencies
2017-03-09 11:53:13 +01:00
71eba4c5d3
prevent copying of buffers
2017-03-09 09:25:26 +01:00
1f5f641d8b
we now use passthrough buffers, so we no longer have to dynamically allocate a buffer for each and every outgoing message
2017-03-09 00:18:53 +01:00
e59d0ff387
removed envelope::message() method because it is expensive
2017-03-08 14:23:05 +01:00
00b81949d3
the AMQP::Message and AMQP::Envelope objects can now longer be copied or moved, and the signatures for creating an envelope and publishing a message have been made much more strict. This could be a API breaking change, to the version number should be upped
2017-03-08 13:32:51 +01:00
c6608cee0a
Added even more debug code for the channelimpl class
2017-03-07 10:10:11 +01:00
055431de6e
Fixed compilation issue due to recent changes in ChannelImpl
2017-03-03 12:56:54 +01:00
d3c0ea293b
better error message if channel is in an error state
2017-03-02 12:09:08 +01:00
ed2ffd3f03
added method tcpconnection::flush()
2016-09-19 10:19:06 +02:00
5bb7b1a36f
added const char * constructors to AMQP::Login class
2016-09-15 12:53:55 +02:00
173225071e
we no longer use "emit" for method names, because it seems to conflict with the Qt library that uses emit as some sort of macro
2016-09-10 20:36:06 +02:00
afb04a8f30
Re-introduced the casting operators with a note explaining why we need this.
2016-09-05 10:11:31 +02:00
c6643062b6
Removed unneeded self-cast operators
...
They are not used and caused a lot of warnings
while compiling and using AMQP-CPP
2016-09-02 22:33:12 +03:00
383914c0c7
Merge pull request #80 from theirix/sigpipe-osx
...
Avoid SIGPIPE on OS X without MSG_NOSIGNAL
2016-07-27 05:09:44 -04:00
53dd7c74c5
Merge pull request #86 from ogapo/master
...
libuv drop in implementation for TcpHandler
2016-07-18 15:12:24 +02:00
fd69a4c01d
map closed sockets to both read and write
...
- this is more consistent with libev so probably will match what existing code expects
2016-07-16 20:43:19 -04:00
584d92e751
can't use struct elaboration with typedef
2016-07-16 20:30:03 -04:00
1e1ec0c133
Update libuv.h
...
- if status is not ok, report that as readable
- no need to stop uv_poll_t before changing events according to the docs
2016-07-16 20:27:00 -04:00
4b7874c5b6
Implement copy constructor for class Monitor
...
To support the instance copy of Monitor like the following:
AMQP::Monitor monitor(consumer);
consumer->bindExchange(exchange, AMQP::direct).onSuccess([&, monitor](){
// do something when the consumer is ready!
if(monitor.valid())
consumer->doSomething();
});
2016-07-17 00:54:42 +08:00
b8d2c0c600
fix casting
2016-07-14 23:49:31 -04:00
5042b699bd
create libuv.h based on libev.h
2016-07-14 23:30:43 -04:00
66f2001c7b
Avoid SIGPIPE on OS X without MSG_NOSIGNAL
...
OS X does not have Linux-specific option MSG_NOSIGNAL.
SIGPIPE can be avoided on OS X by using sockopt SO_NOSIGPIPE.
Credits: https://noahdesu.github.io/2014/01/16/port-sendmsg.html
2016-07-10 21:44:14 +03:00
dddd16b74d
Make sure single gets are processed correctly as well
2016-07-05 16:39:12 +02:00
5d741bfd2d
Merge branch 'master' of github.com:CopernicaMarketingSoftware/AMQP-CPP
2016-07-04 10:14:00 +02:00
5b40c04f2a
Added documentation about missing RabbitMQ functionality
2016-07-04 10:13:50 +02:00
c055b1a439
Merge pull request #77 from javeme/return-type-of-waiting
...
Correct the returning type of Connection::waiting()
2016-07-04 09:41:54 +02:00
Tamas Elekes
Emiel Bruijntjes
Steven Geddis
zerodefect
Aljar Meesters
Aart Stuurman
Alessandro Pischedda
Alessandro Pischedda
Marcin Gibula
Daan Mulder
RafalGoslawski
Okke
Martijn Otto
theirix
David Nikdel
javeme
David van Erkelens